The 'ORIGINAL' AUSTRALIAN MADE SHRINKING DISC has now become our best seller !!
(AS SEEN IN AUST. STREET RODDER, You Tube & on CRUIZIN TV.)
A BIG Thank You to Murray from Cruizin TV www.cruizin.com.au who put up a segment on both Channel 31 & the Cruizin web site.
A write up in Aust. Street Rodder Mag (which we didn't know about) has also helped get the word out there about this fantastic tool.
Shrinking Disc's to suit 9" Grinders.
They must be used with a Sanding Backing Pad and Nut (use 7" they fit 9" grinders) these are readily available at any good tool place.
Imagine, no high cost of oxy to shrink ! They save time & money.
Simply run the disc over the high area to be shrunk (no need to even blue the steel to get it to shrink) and cool off rapidly. We recommend air instead of water to do this as we're using a power tool, saves water all over the floor & of course, air doesn't promote rust.
As with most of our Speciality Tools, they are made from Stainless Steel. We have developed unique dies, with the centre slightly raised to avoid the chance it popping and becoming convex (which would render it useless as what heppens to the cheep metal spun discs) We have incorporated a safety edge to also aid strength. The manufacturing process is done by Hydro forming, this means we can use a heavier gauge material (1.6mm) thicker than those made by conventional spinning. (a Better product & of course Aussie Made!)
We use these in our shop & wouldn't be without them.
We give Free, Experienced Advise!!
9' Shrinking Disc Only $ 69-50
(the same original price for over 6 years)
Plus postage only of $12 to anywhere in Australia.
PLEASE REFER TO THE 'ORDERING DETAILS' AREA AT THE BOTTOM OF THE TOOL SECTION FOR ALL ORDERING.